What We Do | Plover Roofing & Maintenance Roofing Services
Our service list isn't complicated: we fix roofs, replace roofs, and install new ones. We also handle gutters, metal systems, and flat roofing for commercial buildings across Plover.
Roof Replacement
Owens Corning Duration with SureNail technology or CertainTeed Landmark with NailTrak for reliable fastening in high-wind zones. Both meet ASTM D3462 and carry Class A fire ratings per UL 790. In Iowa, we recommend the high-wind versions rated to ASTM D7158 Class H, which is 130 mph wind warranty. Full system install qualifies for Owens Corning Preferred Protection or CertainTeed SureStart Plus warranty.
Get a Free Quote →Roof Repair
Emergency roof repairs in Plover within 24 hours for active leaks. We tarp the area to stop immediate water entry, then schedule the permanent fix. Weekend and holiday emergency service available. Call (877) 349-1553.
Get a Free Quote →Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →New Roof Installation
Building a custom home in Plover? We work directly with you and your architect on material selection, color coordination, and budget planning. From designer shingles to standing seam metal, we install it all and back it with manufacturer plus workmanship warranties.
Get a Free Quote →Metal Roofing
Corrugated metal and R-panel (exposed fastener) at $5-$8/sq ft installed for agricultural buildings, shops, carports, and covered patios in Plover. 29-gauge is budget, 26-gauge is standard. For residential, we recommend 24-gauge standing seam at $12-$22/sq ft. The aesthetics and longevity justify the premium. DaVinci composite shake and slate profiles offer the look of natural materials with metal's performance. Perfect for Plover HOA neighborhoods that restrict metal roofing appearance.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Iowa's weather.
Get a Free Quote →Flat Roofing
Flat roof leak detection in Plover: we start with a visual inspection of seams, flashings, and penetrations. If the leak source isn't obvious, we use electronic leak detection (ELD) or flood testing on membrane roofs. We find it and fix it. No guessing, no unnecessary tear-offs.
Get a Free Quote →Commercial Roofing
Your commercial roof has HVAC units, exhaust fans, plumbing vents, and satellite dishes punching through it. Every penetration is a potential leak point. We install prefabricated curbs, custom-welded flashings, and pitch pans that handle foot traffic and thermal cycling without failing.
Get a Free Quote →Gutter Installation
Half-round copper gutters with round downspouts are the premium install for historic and high-end homes in Plover. We solder every joint on-site with 50/50 tin-lead solder. Copper weathers to a green patina in Iowa's climate over 5-7 years. For modern aluminum installs, we use Spectra Metals .027 gauge seamless stock in 25+ color options with Raytec hidden hangers rated to 25 lbs per linear foot of combined debris and ice load.
Get a Free Quote →Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →